Concrete Sealing Contractors: What Liquid Rubber Coating is and What You Need to Know Before Applying it
It is imperative that homeowners seal their concrete driveways because they will become slick and more slippery during the winter months. When more people are outdoors, this can lead to the potential for accidents as well as an increased risk of slipping and falling on ice. In order to prevent these accidents from happening, it is best to have your driveway sealed with liquid rubber coating or liquid asphalt by professional concrete sealing contractors. This will keep your driveway dry, prevent slipping and falling on ice, and provide additional safety for pedestrians.
Liquid rubber coating is a liquid surface treatment for concrete surfaces, such as driveways and walkways. The liquid forms a protective barrier between the top layer of concrete and the ground. This will keep your driveway dry, prevent slipping and falling on ice, and provide additional safety for pedestrians.
Liquid rubber coating can be applied to any type of concrete surface that has been sealed with an oil-based sealer or latex paint. But you should only apply it if there are no cracks in the concrete, because liquid rubber coating cannot fill them up like other types of sealers do.
It is imperative that homeowners apply this sealant to their driveways because it will provide additional safety for pedestrians. Liquid rubber coating can be applied with a brush, roller, or spray gun. It is important to know that the driveway must be clean and free of any dirt, dust, or debris before applying the sealant.
Applying liquid rubber coating is best done during the winter months when the temperature is freezing and ice will not pose a threat. Before applying any sealants, homeowners should sweep their driveways clean of any dirt, dust, or debris so it does not get trapped between the sealant and the concrete surface. Also, it is important to note that liquid rubber coating is only one type of sealant that can be applied to a driveway. Other types of sealants include liquid asphalt, which can also provide added safety for pedestrians.
When applying liquid rubber coating, homeowners should note that it can be applied with a brush, roller, or spray gun. It is important to know that the driveway must be clean and free of any dirt, dust, or debris before applying the sealant. The liquid sealant should be mixed thoroughly before being poured into a paint tray so there are no air bubbles. Once it has been poured, the liquid rubber coating should be applied to the driveway with a paintbrush in straight lines, starting from one end of the driveway to the other. Then, homeowners should immediately spread out the liquid rubber coating so there are no puddles or streaks left behind.
Once all of these steps have been completed, the homeowner should wait 24 hours until walking and driving on the driveway. The liquid rubber coating will be extremely slippery at first; therefore, homeowners should take extra precautions when they are walking or parking their car on the driveway. It is best to avoid walking or driving on it until it becomes non-slippery in about 24 hours.
13561 Luxe Ave Apt. 205, Bradenton, FL 34211